Grounding Instructions - Workshop WS0255VA Manuel D'utilisation

GROUNDING INSTRUCTIONS

This Vac must be Grounded. If it should
malfunction or break down, grounding
provides a path of least resistance for
electric current to reduce the risk of
electric shock. This Vac is equipped with
a Cord having an Equipment-Grounding
Conductor and Grounding Plug. The Plug
must be inserted into an appropriate Outlet
that is properly installed and Grounded in
accordance with all Local Codes and
Ordinances.
WARNING:
Improper connection
equipment grounding conductor can
result in a risk of electric shock.
Check with a qualified electrician or
service person if you are in doubt
as to whether the outlet is properly
grounded. Do not modify the plug
provided with the vac - if it will not
fit the outlet, have a proper outlet
installed by a qualified electrician.
This Vac is for use on a nominal 120 Volt
circuit, and has a Grounded Plug that
looks like the Plug shown. A temporary
Adapter that looks like the Adapter shown
may be used to connect this Plug to a
2-Pole Receptacle, as shown. If a properly
Grounded Outlet is not available, the
temporary Adapter should be used only
until a properly Grounded Outlet can
be installed by a Qualified Electrician.
The green colored rigid ear, lug or the
like extending from the Adapter must be
connected to a Permanent Ground such
as a properly Grounded Outlet Box Cover.
Whenever the Adapter is used, it must be
held in place by a Metal Screw.
NOTE: In Canada, the use of a temporary
Adapter is not permitted by the Canadian
Electrical Code.
SP7102 WS0255VA WORKSHOP.indb 6
of the
2-Prong Outlet
Make sure this is a
metal screw connected
to a known ground
Metal
Screw
Green
Grounding Lug
6
3-Prong
Plug
Grounding
Prong
Properly
Grounded
Outlet
Adapter
3-Prong Plug
7/10/19 10:57 AM