Installation - Costco Agio 1902357 Mode D'emploi

W
X
Y
Z
AA
BB
1. Carefully unpack all items from the box. Place the base in the final position. There must be a
minimum of 60.96 cm / 24 inches of clearance from the side of the table top to any combustible
walls.
2. Attach a table leg to the firepit base by using two 1/4"x18 mm bolts, two 1/4"x30 mm bolts and
four Ø6.5x1.0 mm washers as shown in Figure 3. Guide the bolts through the holes in the table
leg, into the pre-drilled holes in the firepit base. Hand tighten only 2-3 turns. Repeat for the other
leg.
FIREPIT TABLE TOP
FIREPIT BASE
FIREPIT TABLE LEG
BURNER PAN PROTECTIVE
RING
BURNER COVER
FIREPAN/BURNER
ASSEMBLY

INSTALLATION

Figure 3
6
FP3178 1
FP3179 1
FP3180 2
FP3181 1
FP3182 1
FP3183 1