Bulldog HW Serie Manuel D'instructions page 8

1.2.1 Winch and fairlead Mounting
WARNING
ALWAYS position fairlead with warning readily visible on top.
1. Your mounting surface must be equal to or greater than the footprint of the winch frame.
2. Make sure the motor, drum and gearbox housing are aligned correctly.
1.3 Install the Winch
1. Make sure the winch is aligned correctly
2. Set winch in mounting location. Confirm required bolt length.
3. Install bolts and tighten to torque specified in Table 4 on Page 9.
8
CEQUENT
Installation Instructions
PERFORMANCE PRODUCTS, INC. •
™
Figure 4
F3840-00 REV B (4782) 07/15