Yakima RoadShower 4G Mode D'emploi page 5

1
FILLING AND PRESSURIZING ROADSHOWER
NOTE: Clean the tank before using RoadShower™ for the first
time. See page 2 for instructions to sanitize and clean the tank.
A. Detach the sprayer hose from the tank by releasing the quick release connector.
B. Attach the quick release fitting onto your garden hose.
C. Attach the garden hose to the tank using the quick release connector.
D. Attach the other end of the garden hose to a water supply.
E. Open the valve on the tank.
F. Open the valve on the water supply to begin filling. It will take a few minutes to fill the tank.
G. Remove the air valve cap and use a tire pressure gauge to check the pressure at the air valve.
H. When the pressure reaches 50-65 PSI turn off the water supply and replace the air valve cap.
I. Close the tank valve, remove the garden hose, and reconnect the sprayer hose.
the valve is fully closed before removing the garden hose!
A
D
G
Instruction #1036081B - page 5 of 12
FILLING AND PRESSURIZING THE TANK
sprayer hose
tuyau du réservoir
manguera con
pistola rociadora
B
E
H
WITH A GARDEN HOSE.
™
garden hose
tuyau d'arrosage
manguera de jardín
NOTE: Be sure
garden hose
tuyau d'arrosage
manguera de jardín
C
F
I