Briteq BT-STAGEPAR 6in1 Mode D'emploi page 8

ENGLISH
DMX ADDR
Used to set the desired DMX-address.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to select the desired DMX512 address. The last occupied DMX-address is
also shown: makes it easier to set the address of the next unit in the chain.
 Once the correct address shows on the display, press the ENTER button to save it.
Note: on RDM-compatible controllers this option can also be remotely set.
CH. MODE
Used to set the desired channel mode.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to select the desired mode
 Once the correct option shows on the display, press the ENTER button to save it.
Remark: on RDM-compatible controllers this option can also be remotely set.
SLAVE MODE
Used to set the projector as slave in a master/slave setup.
 Press the MODE button until SLAVE MODE is showing on the display.
SOUND MODE
Used to set sensitivity of the microphone for use with the automatic Sound Mode.
 Press the MENU button until SOUND SENS is shown on the display.
 Press the ENTER button to select.
 Use DOWN and UP buttons to change the sensitivity of the build-in microphone (00 = minimal sensitivity,
31 = maximal sensitivity).
 Once the correct sensitivity is shown on the display, press the ENTER button to confirm.
AUTO RUN
When you select this function, the projector will run all its integrated programs automatically.
You can set the program speed and number of times each program should be repeated.
 Press the MODE button until AUTO RUN is showing on the display.
 Press the ENTER button. SP will blink: this means you can set the running speed of the automatic mode
 Use DOWN and UP buttons to select the desired speed
 Press the ENTER button. R (rate) will blink: this means you can set the number of times each program
should be repeated
 Use DOWN and UP buttons to select the desired rate
 Press the ENTER button to confirm
EFFECT MODE
Used to set the desired effect mode while used as master.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to selected the desired mode:
 COL.CH6
 COL.CH30
 COL.FADE
 Once the correct option shows on the display, press the ENTER button to save it.
 Use DOWN and UP buttons to select the desired playback speed from 01 (very slow) to 99 (fast).
 Once the correct value shows on the display, press the ENTER button to save it.
 Use DOWN and UP buttons to select the desired strobe speed from 00 (NO strobe) to 99 (fast).
 Once the correct value shows on the display, press the ENTER button to save it.
STATIC COLOR MODE
Used to set the desired fixed color while used as master: 9 preset colors + 1 custom color.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to selected the desired color:
BRITEQ
®
(COLOR CHANGE 6) 6 colors change automatically without fading.
(COLOR CHANGE 30) 30different colors change automatically without fading.
(COLOR FADE) colors change with a nice fading effect.
6/55 LDP-COBWASH 60TC + 150TC
OPERATION MANUAL