Updating The Firmware - dB Technologies Ingenia IG1T Caractéristiques Techniques

English

5. UPDATING THE FIRMWARE

It is very important that you keep the product firmware always up-to-date, to ensure its full functionality.
Periodically check the Web site http://www.dbtechnologies.com, in the "DOWNLOADS" section. Once you verify
that a new firmware version is available:
1. Download the USB BURNER MANAGER in the
the relevant instructions
2. Download the .zip file of the latest firmware in the "DOWNLOADS" section for INGENIA IG1T
3. In the top right section of the USB BURNER MANAGER screen, select "File Opening"
4. Select the previously downloaded firmware file (verifying that it is appropriate for your operating system)
5. Click UPDATE
ATTENTION!
When the firmware is updated the presence of the old saved settings
at the next switch-on is not guaranteed.
INGENIA IG1T
"SOFTWARE & CONTROLLER" section, then install it following
Cod. 420120237 REV. 1.1
67