Honeywell HCM-710 Serie Mode D'emploi page 7

CLEANING
(continued)
Disinfecting directions: Disinfect following scale removal
DO NOT DISINFECT the
Wicking Filter.
3
- Soak
Soak for 15-20 minutes.
Note: Please be careful of clothing, rugs and other non bleach resistant materials when
disinfecting. Spilling bleach on clothing, rugs and certain surfaces may cause damage.
1
- Remove/Set Aside
Set aside grille/motor
housing.
4
- Wipe
Wipe funnel area of
grille/motor housing
with the water/bleach
solution.
2
- Add Bleach
Add 1 TB of bleach to 1
gallon water. Add 1 gallon
of water/bleach solution
to water reservoir of the
main housing. Using this
mixture wipe the walls of
the main housing.
5
- Rinse
Main Housing: Thoroughly
rinse main housing until the
smell of bleach is gone
Grille/Motor Housing: Run
water through the FUNNEL
AREA ONLY of the grille until
the smell of bleach is gone.
NOTE: DO NOT submerge
or rinse entire grille as this
could damage the motor.
NOTE: USING MORE
THAN 1 TB OF BLEACH
PER GALLON OF
WATER WILL RESULT
IN DAMAGE TO YOUR
HUMIDIFIER.
7