Comelit FG100F Manuel Technique page 26

1st step (t = 0 s): three blinks
Green Smoke generator regular state. No faulty conditions.
Red Used-up smoke generator .
Yellow Faulty smoke generator
Communication error with the smoke generator activation circuit (probable
Purple
lack of electrical connection or smoke generator absence)
2nd step (t = 1,5 s): single blink (or no blink)
The device is in "TEST and MAINTENANCE" mode.
Blue
The device is not in "TEST and MAINTENANCE" mode. The device is ready
No blink
for activation.
3rd step (t = 3 s): single blink
Green Both Smoke and Siren Inputs are in Normal state (No Alarm)
Red One or both Inputs are active (Alarm state)
4th step (t = 4,5 s): single blink (or no blink)
Blue The device is in "TEST and MAINTENANCE" mode.
The device is not in "TEST and MAINTENANCE" mode. The device is ready
No blink
for activation.
The LED can be disabled by setting the SW-7 switch to OFF further reducing energy consumption.
Additional LED functions are:
• Continuous flashing of white color during the sound of the siren.
• Continuous red flashing if the device is in TEST and MAINTENANCE modemand active and the
smoke generator us active.
26