Data sheets
Power:
Average current:
Power consumption at startup:
Input voltage range:
Logic level "1" on inputs:
Logic level "0" on inputs:
Activation time:
Smoke and siren inputs impedance:
Used-up smoke generator and Error
Outputs:
Autonomy:
Tamper and anti tear output:
Continuous supervision of:
Sound power piezoelectric siren:
Average duration of smoking:
Saturable Volume:
Recommended height for mounting:
Smoke generator replacement:
Signalling LED:
Operating temperature:
Storage temperature:
Degree of container protection:
Size and weight:
18
From 3,0 ÷ 15,0 Vcc
3,000V÷7,999V: ~180μA
8,000V÷15,000V: ~220μA
(with LEDs disabled)
at 12V: max 150mA for 2s
at 3,6V: max 400mA for 2s
0 ÷ 15,0 Vcc
>3Vcc
<2Vcc
1 s (Start Smoking Input, Start Siren Input)
~4kΩ
NC (open collector with reference to GND; max
current: 100 mA.)
The device has energy accumulators that keep it
running even if the power supply fails. This autonomy
guarantees that the device is regularly functional up
to 4 hours after the power loss
NC (contact connected to GND) Anti-tear can be
disabled with J2 jumper
Valid smoke generator, faulty smoke generator, used-
up smoke generator, smoke generator activation
circuit present.
> 95 dB(A) @ 1 m
From 30 to 45 s
100 m
3
From 2,10 to 2,30m above the ground
Recommended every 3 years
2 Red LEDs for variation Status Inputs + 1 Red /
green LED for radio communication
0°C ÷ +45°C
-20°C ÷ +55°C
IP 30
175x120x95 mm, 800g smoke generator included