Troubleshooting - RocketFish RF-700WPS2 Guide De L'utilisateur

• The 6-pin +12V power connector(s) to the PCI-E graphic card(s).
6
Close your computer case.
7
Connect the power cord to the power supply.
8
Switch the I/O switch to I.
9
Turn on your computer.

Troubleshooting

If the power supply fails to function correctly, check the following:
• Make sure that the power cord is plugged into a powered electrical
outlet.
• Make sure that the power cord is plugged into the power supply.
• Make sure that the I/O switch is in the I position.
• Make sure that all power connectors are connected to the motherboard
and devices correctly.
6