Operating Manual; General; Information On This Manual; Warning Notices - CASO DESIGN AF 400 Mode D'emploi

10 Operating Manual

10.1 General

Please read the information contained herein so that you can become familiar with your
device quickly and take advantage of the full scope of its functions.
Your fryer will serve you for many years if you handle it and care for it properly.
We wish you a lot of pleasure in using it!

10.2 Information on this manual

These Operating Instructions are a component of the fryer (referred to hereafter as the
Device) and provide you with important information for the initial commissioning, safety,
intended use and care of the device.
The Operating Instructions must be available at all times at the device. This Operating
Manual must be read and applied by every person who is instructed to work with the
device:
 Commissioning
 Cleaning
subsequent owner along with the device.

10.3 Warning notices

The following warning notices are used in the Operating Manual concerned here.
Danger
A warning notice of this level of danger indicates a potentially dangerous situation.
If the dangerous situation is not avoided, this can lead to death or serious injuries.
► Observe the instructions in this warning notice in order to avoid the danger of death or
serious personal injuries.
Warning
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
Attention
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to slight or moderate injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
Please note
A notice of this kind indicates additional information, which will simplify the handling of the
machine.
caso AF 400
 Operation
Keep the Operating Manual in a safe place and pass it on to the
 Troubleshooting and/or
24