Setting Of Clock/Timer - CASO DESIGN Coffee Compact Mode D'emploi

Press button once. The indicator lamp lights up and the display is iluminated.
Press button - and chose setting for ground coffee.
Press start button. The device will start working and the circuit of the device is rinsed
through. When the start button stops flashing then press to switch the device off.
Pour out the hot water.
Warning
► The blades of the grinder are sharp, do not touch them. Be careful when emptying the
grinding/brewing container and during cleaning.
► grinding/brewing container and during cleaning.
13.3.1

Setting of clock/timer

Display is iluminated, press to set clock and timer.
Default clock is 24-hour clock system. Press and
the 12:00 symbol flashes.
Setting of clock
Press the hour figure flashed, with + you can increase the hour, one hour
–
for each press, the display shows: „13:00", „14:00" .... „0:00"; „1:00" With the hour will
be reduced one hour with each press. Confirm setting with Set the minute in same
way and confirm with The clock symbol stops fllashing and clock setup is
completed.
50