Sharp LL-T1815 Mode D'emploi page 22

Adjusting the screen display
MODE SELECT-2 Menu
MODE SELECT - 2
OSD
LANGUAGE
EXPAND
SCARING
400LINES
INPUT-1 ANALOG
1280 x 1024
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option:
- When adjustment complete: MENU button
OSD
After selecting [OSD], press the
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved
to the left and right. (
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved
up and down. ( buttons)
OSD PIVOT
The orientation of the OSD display can be
changed.( buttons)
ON: Orientation for long height display
OFF: Orientation for long width display
LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following languages.
1.After selecting [LANGUAGE], press the
2.Select the desired language using the
3.Press the MENU button.
EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels,
the display can be expanded if desired. (
buttons)
OFF: Expansion off
ON1: Using the fixed aspect ratio, the entire
screen is enlarged.
ON2: The entire screen is enlarged.
Note:
- If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharp-
ness of the image can be adjusted. (
OFF ON1 ON2
1
640 720
V : 60Hz H : 64kHz
button
button.
buttons)
button.
button.
buttons)
(With analog connection)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc. (
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Note:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
22
buttons)