Updating The Firmware - dji Battery Station Guide De L'utilisateur

Updating the Firmware

Use DJI ASSISTANT TM
1. Connect the Battery Station to a power outlet and press the Power Button to turn on the
Battery Station. Connect the Battery Station to a computer using a Micro USB cable.
2. Launch DJI Assistant 2 and log in with a registered DJI account.
3. Select "Battery Station" and click "Firmware Upgrade" on the left-hand side.
4. Select the firmware version required.
5. DJI Assistant 2 will download and upgrade the firmware automatically.
6. The Battery Station will automatically restart when the update has been successfully
completed.
7. Repeat this process if the firmware update fails for any reason.
Specifications
Model
Dimensions
Net Weight
Max Internal Load
Compatible Stored Items
Input
Output
Operating Temperature
Charging Time*
* Charging times are tested in a lab environment at room temperature. This values should be used for
reference only.
©
2017 DJI All Rights Reserved.
7
2 and follow the instructions below to update the Battery Station.
IN2BS
484 mm × 226.5 mm × 220 mm
7.7 kg
12 kg
TB50 Intelligent Battery × 12
WB37-4920mAh-7.6V Intelligent Battery × 2
WCH2 Charging Hub × 1
AC Power Cable × 1
100-240 V, 50-60 Hz
Battery Port: 26.1 V max., 6.75 A max. × 8
Remote Controller Port: 26.1 V max., 4 A max. × 2
USB Port: 5 V, 2 A × 2
41° to 104° F (5° to 40° C)
TB50 Intelligent Battery:
90 minutes (Normal mode); 35 minutes (Quick mode);
4 hrs 20 minutes (Silent mode)
Remote Controller:
2 hrs 24 minutes (GL6D10A); 3 hrs (GL800A)