Technical Data; Product Features; Intended Use - Leister ELECTRON Notice D'utilisation

Technical Data

Voltage
Frequency
Power
Temperatur
Air flow (20°C)
Weight with cord (3 m)
Dimensions L x Ø
Protection class
Noise level L
pA

Product Features

1. Pipe of the heating element 2. Temperature scale 3. Rubber foot 4. Handle 5. Mains connection 6. Air slide
7. Air filter 8. Potentiometer for temperature adjustment 9. Mains switch

Intended Use

When observing the safety instructions and using original Leister accessories, this hot air tool is suitable for all hot
air applications listed in these operating instructions.
Applications
A
Welding of thermoplastics as well as elastomer bitumen
Heating for forming, bending and coupling of thermoplastic components
Drying of moist surfaces
Shrinking of heat-shrinkable sleeves/hoses, solder connectors as well as packaging for electrical components
Removal of old shellac varnish, synthetic enamel, undercoating on vehicles
Defrosting frozen water lines
Activating/dissolving solvent-free and hot-melt adhesives
Igniting of wood chips, paper, coal or straw in furnaces
Applications
B
Industrial joining technology
All kinds of drying and heating-up processes
Shrinking and welding of packing foils and preformed parts
Activating and dissolving solvent-free adhesives and hot-melt adhesives
Sterilization of packing materials such as small bottles, cork and cosmetic articles
Smoothing out dragée coatings, glossing of chocolate and cosmetic articles
Separating and melting synthetic threads and fabrics
Removing plastic flash (deflashing) and glossing plastic surfaces
Mounting t he Nozzles/Reflectors
Touching hot nozzles/reflectors can cause serious burns. Before mounting or replacing nozzles/reflectors,
allow the unit to cool down completely or use a suitable tool.
Nozzles/reflectors that fall off or come undone from the unit can ignite objects or set them on fire. The noz-
zles/reflectors must be mounted firmly and securely on the unit.
Hot nozzles/reflectors can set the pad/backing on fire. Place down hot nozzles/reflectors only on a fire resist-
ant pad/backing.
Incorrect or defective nozzles/reflectors can lead to a hot air build-up and damage the unit. Use only orig-
inal Leister nozzles/reflectors that are suitable for your unit.
[V] 42 120
[Hz]
[W] 1000 2700 3000 2300 3400 4500 5500 2700 3000 2300 3400
[°C]
[°F]
[l/min]
[cfm]
[kg]
[lbs]
[mm]
[dB]
English - 9 -
Electron
200 230 230 230
50/60
20 – 650
70 – 1200
320
11.3
1.5
3.3
320 x 95, Handle Ø 64
II/ (Double insulated)
65
Mistral
400 120 200
50/60
20 – 650
70 – 1200
500 350
17.7 12.4
230 230