Technical Data - Leister WELDPLAST S2 Instructions D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product in the
version put into circulation by us, fulfils the requirements of the following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 04.01.2016
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly
way. For EU countries only: Do not dispose of electrical equipment with household refuse!

Technical Data

Voltage
Power consumption
Frequency
Air volume (20 °C)
Air temperature
Plasticizing temperature °C
Output (Ø 3 mm)
Output (Ø 4 mm)
Filler rod
Dimensions L × B × H
Weight
Conformity mark
Safety standard
Protection class I
* WELDPLAST S2-PVC
2006/42
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016)
2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016)
2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~ 230
W 3000
Hz 50/60
l/min 300
°C max. 350
max. 260
kg/h PE 0.6 –1.3 PP 0.5 –1.2 *PVC-U 0.9 –1.7 (average values at 50 Hz)
kg/h PE 1.0 – 2.3 PP 0.9 – 2.0 *PVC-U 1.5 –2.7 (average values at 50 Hz)
mm Ø 3 / Ø 4
mm 450 × 98 × 260 (without welding shoe)
kg 5.8 (without power cable)
2
3
1
Andreas Kathriner, GM
200
2400
2
1
The right to make technical changes is reserved
17