LEXIBOOK TV Motion Games Console JG7300 Mode D'emploi page 10

WARNING: Mal-function or loss of memory may be caused by strong frequency interference or electrostatic
discharge. Should any abnormal function occur, reset the unit or remove the batteries and insert them again, or
unplug the AC/DC adapter from the mains socket and plug it back in.
Connecting the console to a television
The "TV Motion Games Console" needs to be connected to a television.
Note: Switch off the television AND the console BEFORE connecting.
1. Plug the AV cable (yellow connector) into the corresponding video input on the television.
2. Plug the AV cable (white connector) into the corresponding audio input on the television.
3. Plug the AV cable (red connector) into the corresponding audio input on the television.
4. Switch on the television.
5. Select the AV channel, also called "INPUT" or "Auxiliary"
Note: It's possible that changing the channel is done using the television's remote control. Check the television's
instruction manual.
6. Switch the games console on by pressing the "POWER" button.
7. To switch the games console off, press the "POWER" button, then unplug the AV cable.
Location of the games console and playing area
To make the most of playing on the console, read the instructions listed below:
• Position the console as shown on the diagram below:
JG7300IM1252_25Jun_V04.indb 10
1m to 2m
10
22/06/2012 12:09 PM