Use With Joie Infant Child Restraint; Cleaning And Maintenance - Joie CROSSTER Manuel D'instructions

Use Rain Cover
see images
66
To assemble the rain cover, place it over the stroller, and then
attach it on the handle by hook and loop fasteners.
!
When using the rain cover, please always check its
ventilation.
!
When not in use, please check that the rain cover has been
cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain
cover during hot weather.

Use with Joie Infant Child Restraint

see images -
67 73
-
Please refer to to detach soft goods before attaching
42 61
infant child restraint to the stroller.
When using with Joie infant child restraint i-Level, i-Snug,
gemm or i-Gemm 2, please refer to the following instructions.
1. To attach adapter, place adapter onto mounts as show
A "click" sound means the adapter is locked completely.
2. To attach infant child restraint, place infant child restraint
onto adapter as show , A "click" sound means the child
70
restraint is locked completely.
3. To remove infant child restraint, lift the infant child restraint
- 2
upwards while pressing the two stroller fix release
72
buttons. - 1
72
!
If you have any problems about using the stroller and the
adapter, please refer to their own instruction manuals.
!
Please don't fold stroller when attaching the infant child
restraint.
27
66
68
,
69
71
Use Carry Cot
see images -
74 79
-
Please refer to to detach soft goods before attaching
42 61
carry cot to the stroller.
When using with Joie carry cot Ramble, Ramble XL, please
refer to the following instructions.
!
Adjust the backrest to the lowest position.
!
If you have any problems about using the stroller and the
carry cot, please refer to their own instruction manuals.
!
Please don't fold stroller when attaching the carry cot.

Cleaning and Maintenance

see images
80
!
Removable seat pad may be washed in cold water and drip-
dried. No bleach. Please refer to the care label for instructions
on cleaning the fabric parts of the stroller.
!
To clean stroller frame, use only household soap and warm
water. No bleach or detergent. Periodically wipe clean plastic
parts with a soft damp cloth. Always dry the metal parts to
prevent the formation of rust if the stroller has come into
contact with water.
!
From time to time, check your stroller for loose screws, worn
parts,torn material or stitching. Replace or repair the parts as needed.
!
Excessive exposure to sun or heat could cause fading or
warping of parts.
!
If stroller becomes wet, open hood and allow to dry
thoroughly before storing.
!
If wheels squeak, use a light oil (e.g., Silicon Spray, antirust
oil, or sewing machine oil). It is important to get the oil into
the axle and wheel assembly.
!
When using your stroller at the beach, completely clean your
stroller after use to remove sand and salt from mechanisms
and wheel assemblies.
80
28