Pdu Kit Components - Dell RapidPower Power Guide D'installation

PDU Kit Components

The kit components (shown in Figure 1-2) are the same for all PDU models.
• One PDU (with the 0-U mounting bracket attached)
• Power cords (of various lengths and types depending on the model)
• Two 1-U mounting brackets
• Three 10-32 x 0.5-inch pan-head screws
• Two #10 flat washers
One #5.5 x 13-mm black thread-forming screw
•
• Two #10 star locking washers
• Three horizontal rail spacing pads
• Two cage nuts
• One ground wire
• One power cord retainer bracket (for 10-A and 12-A power strips and 16-A PDUs only)
• One package of voltage labels for customers for identifying voltages on PDUs and power strips
(if applicable)
Figure 1-2. Kit Contents
PDU with 0-U
mounting bracket
attached (12-A IEC
power strip shown)
1-U mounting brackets (2)
horizontal rail
spacing pads (3)
8
Installation Guide
power cord(s)
ground wire
power cord retainer
bracket (for 10-A and
12-A power strips and
16-A PDUs only)
#5.5 x 13-mm black
thread-forming screw (1)
#10 flat
washers (2)
10-32 x 0.5-inch pan-
head screws (3)
voltage labels
(if applicable)
cage nuts (2)
#10 star locking
washers (2)