Upholstery Spray Nozzle - Rotho TWINtt Mode D'emploi

Upholstery Spray Nozzle

The ROTHO TWIN TT AQUAFILTER includes two nozzles for deep-cleaning. The upholstery spray
nozzle is the smaller of the two and should be attached directly to the wet suction hose handle to
clean upholstery, car seats, and other similar surfaces. To prepare the upholstery spray nozzle, do
the following:
1. Attach the end of the upholstery spray nozzle
to the handle of the suction hose.
2. Connect the solution hose from the carpet
spray nozzle to the check valve. Push the
plug gently inward and turn it clockwise until it
locks in place. An audible click indicates a
successful connection.
Finally, if this is your first time using the upholstery
spray nozzle, you must attach the end of the solu-
tion tube to the spray nozzle. To attach the solution
tube spray tip, slide the plastic tip into the clip on
the underside of the carpet spray nozzle. An audible
click indicates a successful connection.
If you are deep-cleaning upholstery or other fabric, the upholstery spray nozzle is ready to use. How-
ever, if you are cleaning windows, you must equip the short window adapter to avoid damage to your
windows.
Do not use too much solution!
Excess solution causes longer drying times and can cause fabric to dry with waves and bumps. These waves and
bumps fade with time but should be avoided if possible. Using excess solution can also dampen the cushioning beneath
upholstery, resulting in longer drying times and the danger of mold and mildew growth.
ROTHO TWIN TT AQUAFILTER User Manual
All manuals and user guides at all-guides.com
1
2
25