Deep-Cleaning Accessories; Carpet Spray Nozzle; Floor And Long Window Adapters - Rotho TWINtt Mode D'emploi

Deep-Cleaning Accessories

Before you begin deep-cleaning, you should attach a deep-cleaning accessory to the suction hose
handle. It is important to choose the accessory based on the surface you will be vacuuming. Select
one of the following accessories:

Carpet Spray Nozzle

The ROTHO TWIN TT AQUAFILTER includes two nozzles for deep-cleaning. The carpet spray noz-
zle is the larger of the two and is intended to be used with the telescopic wand attachment to clean
carpets, rugs, and hard floors. To prepare the carpet spray nozzle, do the following:
1. Attach the end of the telescopic wand to the
handle of the suction hose.
2. Attach the carpet spray nozzle to the other
end of the telescopic wand.
3. Connect the solution hose from the carpet
spray nozzle to the check valve. Push the
plug gently inward and turn it clockwise until
it locks in place. An audible click indicates a
successful connection.
4. To prevent the solution tube from hanging
freely, clip it to the telescopic wand using the
wand clips provided with your TWIN TT.
Finally, if this is your first time using the carpet spray nozzle, you must attach the end of the solution
tube to the spray nozzle. To attach the solution tube spray tip, slide the plastic tip into the clip on the
underside of the carpet spray nozzle. An audible click indicates a successful connection.
If you are deep-cleaning carpet or other fabric, the carpet spray nozzle is ready to use. However, if
you are deep-cleaning windows or hard floors, you must equip the floor or long window adapter to
avoid damage to your windows or floors.

Floor and Long Window Adapters

To equip the floor or long window adapter, do the following:
1. Turn the carpet spray nozzle over to reveal the black underside and lo-
cate the two teeth on the end of the nozzle.
2. Position the teeth of the window or floor adapter between the teeth on
the nozzle. The Adapter sticks out to one side of the nozzle. Push the
adapter onto the nozzle.
3. Slide the Adapter sideways until the adapter locks into place.
The carpet spray nozzle is ready.
24
All manuals and user guides at all-guides.com
1
ROBERT THOMAS, L.P. ©2010
2
3 4
2
3