Prepare The Twin Tt For Deep-Cleaning; Set Up The Anti-Splash Grid - Rotho TWINtt Mode D'emploi

Prepare the TWIN TT for Deep-Cleaning

Before you begin deep-cleaning, you must prepare the TWIN TT by setting up the anti-splash grid,
adding cleaning solution, and attaching the suction hose.

Set Up the Anti-Splash Grid

To prepare the AQUAFILTER for deep-cleaning, do the following:
1. Lift the cover lock.
2. Open the casing cover.
3. Take hold of the small handle at the center of the AQUAFILTER and remove the AQUAFILTER
from the recovery tank. The AQUAFILTER is not used during deep-cleaning.
3
4. Insert the anti-splash grid into the recovery tank.
5. Remove the HEPA filter. The HEPA filter is not used during deep-cleaning.
6. Make sure the wet filter and motor protection filter are firmly in place.
7. Close the casing cover.
The anti-splash grid is ready for deep-cleaning.
22
All manuals and user guides at all-guides.com
1
2
4
6
ROBERT THOMAS, L.P. ©2010
5