Battery Loading & Replacement
Notes:
• Refer to operating instructions included with the battery
and battery charger.
• Battery replacement is recommended when the power
indicator lights up in red and a pulsing beep is heard in
the headphone.
I Installation
1. Insert the battery in the battery case as shown in the fig-
ure.
Battery Case
Battery
Terminal
I Loading
1. Prepare a fully charged battery.
2. Insert the battery as shown in the figure.
Note: Be sure to insert it until the lock clicks.
q
e
When inserting the battery,
check the positive and
negative sides.
Battery Case
w
I Replacement
1. Slide the battery lock to the outside.
2. Remove the battery.
3. Proceed as described in "Loading" above.
w
q
Battery Case
9