Door:
Clean the door and the observation window by the rubbing with a soft damp
cloth.
Rub the door seals and adjacent parts to remove any splashes or other dirt.
Wipe the control panel with a damp cloth.
Interior walls:
Wipe the interior walls with a damp cloth.
Wipe the cover of the waveguide in order to remove all possible traces of
splashing.
Turntable / rotating ring / axis of rotation:
Wash with water and mild soap.
Rinse with clear water and dry completely.
Repair
Check the following before calling for service.
1. Place a cup of water (about 150 ml) in the oven and close the door completely.
The oven light goes off when the door is closed. Allow the oven to run for 1
minute.
2. Is the oven on?
3. Does the cooling fan work?
(Place your hand over the rear ventilation openings.)
4. The turntable is running?
(The turntable is rotatable clockwise or counterclockwise. This is normal.)
5. The water in the oven is warm?
If the answer to any of these questions is no, check your outlet and fuses the
electrical panel.
If the wall outlet and fuses function normally, CONTACT THE AUTHORIZED
REPAIR CENTER NEAREST.
Safety instructions for repair Warning:
EN-25