Installation Procedure; Preparing The Cooktop - Bosch NGM5458UC Instructions D'installation

Masquer les pouces Voir aussi pour NGM5458UC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation with horizontal panel
If there is no oven beneath the cooktop, install a horizontal
panel. To allow access to the power supply connection
and regulator maintain a minimum clearance of
⅜" (10 mm) from the edges of the panel (F).
IMPORTANT: Complete the installation of the cooktop be-
fore installing the horizontal panel.
Installation above a drawer
A
min. ¾" (19 mm)
max. 2" (50 mm)
B
5⅞" (150 mm)
C
2¾" (70 mm)
D
min. 0" (0 mm)
E
2⅜" (60)
F
min. ⅜" (10 mm)
Installation above a cabinet door
A
min. ¾" (19 mm)
max. 2" (50 mm)
B
5⅞" (150 mm)
C
2¾" (70 mm)
D
min. 0" (0 mm)
E
2⅜" (60)
F
min. ⅜" (10 mm)
G
min. 1" (25)
4 Installation procedure

Installation procedure

Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
4.1 Preparing the cooktop
Place the cooktop face down on a soft and stable sur-
1.
face. Use the foam sheet from the packaging to protect
surfaces from scratching.
Apply the included foam sealing tape around the edges
2.
of the underside of the appliance along the rough-in box
flange.
Insert the two fixing clips into the slots at the rear side of
3.
the cooktop.
Installation procedure en-us
9

Publicité

Table des Matières
loading

Table des Matières