General Electric PFDS450 Manuel D'utilisation Et D'installation page 22

CONNECTING AN ELECTRIC DRYER (skip for gas dryers)
TOOLS YOU WILL NEED
Slip-joint pliers
Flat-blade crewdriver
MATERIALS YOU WILL NEED
4" dia. metal elbow
3/4" strain relief
(UL recognized)
4" duct clamps (2) or
4" spring clamps (2)
Safety glasses
4" dia. metal duct
(recommended)
4" dia., UL-listed
flexible metal duct (if
needed)
Installation Instructions
Phillips screwdriver
Level
Gloves
Exhaust hood
Duct tape
Dryer power cord kit
(not provided with
dryer)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type
as per the house
receptacle before
purchasing line cord.
FOR YOUR SAFETY:
WARNING
Before making the electrical connection, turn off
the circuit breaker(s) or remove the dryer's circuit
fuse(s) at the electrical box. Be sure the dryer cord
is unplugged from the wall.
ACCESS COVER OFF THE TERMINAL BLOCK.
ELECTRICAL CONNECTION
INFORMATION FOR ELECTRIC DRYERS
WARNING –
fire, electrical shock and personal injury:
• Do not use an extension cord or an adapter plug
with this appliance.
• The dryer must be electrically grounded in
accordance with local codes, or in the absence
of local codes, with the National Electrical Code,
ANSI/NFPA NO. 70 or Canadian Electrical Code,
CSA C22.1.
22
NEVER LEAVE THE
To reduce the risk of