Fault Rectifi Cation; Malfunction Causes And Remedies - SilverCrest SHU 3.1 B2 Mode D'emploi

All manuals and user guides at all-guides.com
Fault rectifi cation
This section contains important information on fault localisation and
rectifi cation. Observe the instructions in order to avoid risks and damage.

Malfunction causes and remedies

The following table will help with localising and remedying minor
GB
malfunctions:
Defect
No picture displayed.
No sound.
NOTE
► If the aforementioned solutions do not resolve the problem,
please contact the Customer Service (see chapter Service).
38
Possible cause
Output device or source
devices not correctly
connected.
Output device or source
devices not switched
on.
Output device or source
devices not correctly
connected.
Check whether your
source device transmits
audio. No sound
transmitted when using
a DVI-HDMI adapter.
Rectifi cation
Check all cable
connections.
Ensure that all devices
are switched on.
Check all cable
connections.
Additional audio
connection cables are
required when connect-
ing DVI devices.
SHU 3.1 B2