Intended Use; Safety; Basic Safety Instructions - SilverCrest SHU 3.1 B2 Mode D'emploi

All manuals and user guides at all-guides.com

Intended use

This device allows you to connect three source devices (e.g. SAT
receiver, Blu-ray player or HD camera) with an HDMI connection
of your television or beamer. It is not possible to distribute a source
device to three output devices, since only one output device can be
connected. This device is exclusively intended for non-commercial use.
GB
The device is not intended for any other use or for uses extending
beyond those stated. Claims of any kind for damage arising as a
result of non-intended use are excluded. The user is the sole bearer
of the risk.

Safety

This section provides you with important safety information regarding
the handling of the device. The device complies with statutory safety
regulations. Incorrect usage can lead to personal injury and property
damage.

Basic safety instructions

For safe handling of the device, follow the safety instructions below:
■ Before use, check the device for visible external damage. Do not
start up a damaged device or one that has been dropped.
■ Damaged cables or connections should be replaced by the
customer service department.
■ Always take hold of the connection cable by the plug. Do not pull
on the cable itself and never touch the connection cable with wet
hands, this could result in either a short circuit or you receiving an
electric shock.
■ Do not place objects, furniture or similar items on the connection
cable and ensure that it cannot become trapped.
32
SHU 3.1 B2