SOUNDMASTER MCD5500 Mode D'emploi page 19

B) Copying of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the "
operation procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file
being read.
C) DAB encoding
1. Operate tuner mode refer above listening to radio section to receive the station you would like to encode.
2. Press the " " button twice (4) until the unit will display flashing with "REC USB" icon. Encoding is now performing.
3. After finish of recoding, press "stop
D) Cassette/Phono encoding
1) Plug in the USB pen drive or SD/MMC card for recording (make sure it had enough empty space).
2) Set the unit to your desired encoding mode by function button (10) such as "tape" mode or phono...etc and then start to
playback the track would like to encode, then press the "
3) The LCD display (2) will flash with "REC USB" icon. Now the system is starting the encoding mode.
4) Start playback of cassette tape or your external Aux device which the track you prepare to encoding to MP3 format.
5) After finishing of recoding, press "stop
E) track separation (On remote control only)
You can divide the recording music from tape or DAB...etc in to USB track by track during encoding. Every time when press the
" " (track separation) button (on remote control) once during encoding from tape or Aux in, the system will generate a new
track and continuous the recording. The text "SAVE" at LCD display will flash one time, it mean the unit is creating a new track
successfully.
F) Copying of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the "
operation procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file
being read.
File delete at USB / SD card (by remote control)
The system is able to erase the file stored inside the USB pen drive by following:-
1 Insert the media storage and set at "USB" mode.
2 Press the "delete" button and the LCD display (2) will show (del ---001)
3 Press skip forward
4 Press the "delete" button to enter "yes/no" mode and then press skip forward
"no".
5 Press the "delete" button again to confirm the setting.
Remark:
- Press "stop" button once at remote handset to quite delete mode
Phono
Noted:
- Remove the stylus protector.
- Be sure that the tone arm is being detached from the tone arm rest before operating and
re-secured again afterwards.
" button (3) until the symbol "REC USB" disappear.
" button (3) until the symbol "USB" & "REC USB" disappear.
or skip backward button to select the file going to delete
M_MCD5500SW / English Instruction Manual
" button (4) twice.
or skip backward
" button (4). The
REC" button (3). The
to select "yes" or
Cartridge
Stylus assembly
7