Sonnenstrom Fabrik Excellent Notice De Montage page 21

Excellent Glass/Glass frameless:
Connecting the modules with the substructure:
There are several methods to connect the modules
to substructure: by clamping the modules from the
front with a clamping plate (example A) or by a
clamping wing(example B)
Use a torque wrench for installation. The required
tightening torque for the above samples is 14.8 lb ft
(20 Nm). Use M6 bolts made of V2A.
For laminates, use the explicit installation instruc-
tion contained in the installation manual of the se-
lected mounting system. Always use appropriate
corrosion-proof fixing materials for installation.
Example A: Clamping plate
Example B: Clamping wing
21