Sonnenstrom Fabrik Excellent Notice De Montage page 20

Install the module in an area free of shade:
Even a low degree of shading will have a negative
375 mm
effect on the system yield. Therefore, the system
+/- 100 mm
must be installed in a location without shading. The
module should never be shaded completely during
the whole year and be exposed to direct sunlight for
several hours per day even in less favorable peri-
ods of the year.
Ensure an appropriate ventilation on back:
By an appropriate ventilation on the back, an accu-
mulation of heat with adverse effects on the perfor-
mance can be avoided.
375 mm
+/- 100 mm
Secure attachment
To ensure that modules are installed correctly,
make sure to securely attach the modules at least
four points. Framed PV modules can be clamped
on both the short and long sides according to the
clamp areas given in the product data sheets.
Frameless glass-glass modules must be clamped
on the long sides and cannot be installed with arbi-
trary clamp types. Only laminate clamps approved
by CS Wismar GmbH may be used to mount the
modules. Use of unauthorised laminate clamps will
render the product and performance warranty void.
20