General Safety Information - Sonnenstrom Fabrik Excellent Notice De Montage

General safety
information
The operation and maintenance of a PV system
require a substantial level of technical knowledge.
Therefore, any work on the system may only be
carried out by qualified and authorized personnel.
Make sure to read these mounting instructions
carefully before installing, commissioning or servi-
cing the PV system and keep these instructions in
a well accessible location. Failure to comply with
the safety instructions may result in personal injury
and product damage. Please keep children away!
We strive to be the leader in innovation and re-
search, while continuing to improve our products.
For this reason we reserve the right to make chan-
ges to this installation guide without prior notice
Important safety instructions
The use of these modules must comply with ori-
ginal design purposes. The modules should not
be altered technically. When mounting, make sure
that the valid local building regulations, standards
and accident prevention regulations are adhered
to. Make sure that all required safety instructions
for the mounting and operation of any further sys-
tem components are also adhered to. Furthermo-
re, the general technical preliminary remarks of CS
Wismar GmbH apply.
Installation Guide
Warning: Extreme Danger due to electrical
shock!
Solar modules generate electricity. When exposed
to light, a voltage occurs, which can be dangerous
and life-threatening. Even though the individual
modules generate a relatively low voltage of 50
V DC, the voltage will accumulate as soon as se-
veral modules are connected in series. Modules
connected in parallel result in accumlation of the
currents. Although the fully insulated plug contacts
are designed to protect against accidental contact,
the following instructions must be followed when
handling the solar modules in order to avoid co
bustion, spark formation and, above all, fatal ele
trical shocks:
• Never insert electrically conducting pieces
into the plugs and sockets!
• Do not wear metallic jewelry during mechani-
cal and electrical installation!
• Keep the tools and work area dry! Only
install solar modules and wires with dry
plugs and sockets!
• Maintain utmost caution and care! When
working on the wires, always use both
tools and gloves which are insulated!
• Do not disassemble the modules! Never
remove parts or name plates fitted by the
manufacturer! Only use flawless modules!
Do not treat the back side of the modules
with sharp objects, paints or adhesives!
• Do not expose modules to artificially con-
centrated sunlight
It is absolutely necessary that the wiring of the mo-
dules is only carried out by qualified and a tho-
rized personnel!
15