Reciclying And Disposing; Guarantee - Greencut GM650X Manuel D'utilisation

STORAGE
• Store this tool in a safe, dry place with temperatures between 0º and 45ºC.
• Store the machine with the cutting element protection installed.
• Wait for the machine to cool before storing.
• To reduce the risk of fire, keep the engine, muffler and fuel tank clean by removing cut material, oil and grease.
• Before storing the machine for a long period of time, ensure that the storage area is free of excessive moisture
and dust.
• Store the machine out of the reach of children and where fuel vapor does not come into contact with flames or
sparks.
• For long periods of storage, store the machine without fuel. The stored fuels must be stabilized with a stabilizer.
Remove the spark plug and pour about 3 cm3 of oil into the cylinder through the spark plug hole. Slowly slide the
recoil starter 2 or 3 times so that the oil can cover the inside of the engine and replace the spark plug.

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources. Dispose of the device in an environmentally friendly manner. Do not
dispose of it with household waste. Its plastic and metal components can be separated and recycled. Take this
appliance to an approved recycling centre (green dot).
Gasoline, used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in
regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local
regulations: take them to a recycling center.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product.
As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its
description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.
81
EN