Technical Data - Greencut GM650X Manuel D'utilisation

68

TECHNICAL DATA

Engine
Maximum speed
Relay speed
Displacement
Maximum power
Start-up
Gasoline/oil ratio for 2-stroke engine
Fuel tank capacity
Carburetor type
Start-up
Spark plug
Air filter
Starting method
Cooling system
Transmission
Sound power level
Vibration level
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.
BOX CONTENTS
1. Multifunctional tool
2. Accessories (see table below)
3. Protective gaiters
4. Hearing protector
5. Protective gloves
6. Mixing pot
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
GM650X
2-stroke petrol
10,000 rpm
3,000 rpm
65 cc's.
4,9 hp / 3,65 Kw
Manual Easy-start
25:1
1 L
Diaphragm type
Flywheel magnet (CDI system)
BM6A
Semi-wet, quick installation/uninstallation
Reversible starting
Forced air
Ø8 mm steel rod, motor connection and 9-spline head. 7
mm square bar connection
110 dB
2.32 / 2.78 m/s2 ---> Standby (Front/Rear)
3.64 / 3.89 m/s2 ---> Running (front/rear)
7. Protective goggles
8. Key 8/10
9. Spark plug wrench
10. Allen key 4mm/5mm
11. Screwdriver
12. User's manual