Maintenance; Maintenance Schedule - Greencut GM650X Manuel D'utilisation

78

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.

MAINTENANCE SCHEDULE

MAINTENANCE
Check for loose bolts/
nuts
Tighten all bolts and
nuts
Fuel filter cup (if
equipped with it)
Air filter
Fuel filter (if
equipped)
Spark plug
Cleaning/Purging the
fuel tank
Fuel line
Blades/Chain (parts
with blades)/Chain
only
Adjusting the idle
speed
Motor adjustment
Cleaning the
combustion chamber
Grease bar
accessories (as
applicable)
NOTE: In harsh conditions such as high operating temperatures, higher than normal loads and dust,
service intervals must be reduced.
EACH
EACH
MONTH OR
USE
15H USE
Check
Check
Check
Check
Check
EACH EACH
3 MONTHS OR 6 MONTHS OR
30H USE 60H USE
Realize Replace
Clean/Replace if necessary
Check Replace
Check Replace
Realize Replace
Clean/Replace if necessary
Clean/Replace if necessary
Check
Check Replace
Grease
EACH
12 MONTHS OR
100H USE
Adjust