Parts And Components - cecotec FORCE CLIMA 12500 COLD&WARM Manuel D'instructions

ENGLISH
place the power cord orderly to prevent someone from being
tripped or pulling out the plug.
Keep the air inlet and outlet free from obstructions.
When drainage hoses are installed, ensure that they are
properly connected and are not bended.
When moving the device, make sure that it is in an upright
position.
Do not install and use the air conditioning in the bathroom or
other humid environments.
Do not use insecticide sprays or other flammable substances
near the air conditioning.

2. PARTS AND COMPONENTS

Fig. 1
1. Control panel
2. Flap
3. Top cover
4. Front housing
5. Rear housing
6. Omni-directional Wheel
Fig. 2
7. EVA filter housing
8. Rear housing
9. Handle
10. Air vent
11. Continuous drainage hole
12. CON filter
13. Cable holder
14. Drainage hole
15. Mains power cable
16. Power plug
Fig. 3
17. Window sealing plate assembly
18. Air-outlet nozzle
19. Exhaust pipe assembly
20. Exhaust pipe joint
20
FORCE CLIMA 12500 COLD&WARM / FORCE CLIMA 14500 COLD&WARM