RIDGID BS1400 Manuel Du Propriétaire page 17

18. On-Off Switch
CAUTION: Before turning switch "ON", make sure
the blade guards are correctly installed and operat-
ing properly.
The On-Off switch has a locking feature. This feature is
intended to help prevent unauthorized and possible
hazardous use by children and others.
1. To turn band saw "On" insert key into switch.
NOTE: Key is made of yellow plastic, located in the
loose parts bag.
2. Insert finger under switch lever and Pull end of
switch out.
3. To turn band saw "Off" Push lever in.
WARNING: Never leave the band saw unattended
until it has come to a complete stop.
4. To lock switch in "Off" position hold switch in with
one hand and remove key with other hand.
WARNING: For your own safety, always lock the
switch "Off" when band saw is not in use, remove
the key and keep it in a safe place. In the event of a
power failure (all of your lights go out) turn switch
off, remove the key and store it away from the band
saw. This will prevent the machine from starting up
again when the power comes back on.
17