Harrie Leenders TRIAS Instructions D'installation page 47

7. Hanging the stove
• Pull the packaging on the back of the stove upwards.
• Slide the stove including the MTI brace as close to the wall
bracket as possible. Make sure the oblong holes push aside
the eyes. Attention! Do not damage the floor.
• Fix the 2 cotters in the eyes with the opening forwards;
tap them fastened.
• Turn loose all nuts from the MTI brace and turn the bolts down.
• Remove the MTI brace.
9. Flue material
• Put the single-walled flue in place.
• Snap the casing around the raised edges.
• Now fix the smoke baffles.
8. Levelling
• Use the two M10 bolts provided on the underside of the wall
bracket to level the stove (open-end wrench, j.w. 17).
• You can mount the edge with the provided M 5x8 bolts.
10. Position smokebaffles
• Attach first the smoke baffle (steel) with a 5mm pin.
• Attach the second smoke baffle (prisolith) with a 5mm pin.
• Position smokebaffles see page 14+15.
Smoke baffle (steel)
Smoke baffle (Prisolith)
GB 47