Harrie Leenders TRIAS Instructions D'installation page 46

3. Positioning the wall bracket
• Determine the centre of the wall bracket.
• Drill a hole at 843 mm from the floor using a Ø6 mm masonry bit.
• Use the wall bracket (as a template) and spirit level
when drilling the 5 other holes (Ø6 mm).
• Ream the 6 holes using a Ø14 mm masonry bit.
5. Unpacking the stove
• Unscrew the MTI brace from the pallet.
• Place the stove including the MTI brace on a handtruck (back
of stove against the handtruck).
46 GB
4. Mounting the wall bracket
• Mount the wall bracket using the expansion-shell bolts.
• Make sure it is accurately positioned using the spirit level.
• Stick 2x flat tape against the vertical strips from the wall bracket.
6. Moving the stove
• Place the sliding pieces underneath the MTI brace.
• Slide the stove including the MTI brace as close to the
wall bracket as possible.