Publicité
Les langues disponibles
Les langues disponibles
- Try to reduce the exposure to vibrations by, for instance, wearing gloves and by
taking regular breaks.
Description and assembly
1. Blow channel (2 parts)
2. Blow channel lock button
3. On/off switch
4. Handle
5. Battery
6. Battery charger
Do not use the machine
before it is completely
assembled, as in the picture !
Assembly of the leaf-blower
Slide both parts of the blowing channel in each other until you hear a click.
-
Potentially remove the battery from the leaf-blower before you assemble or
-
disassemble the blowing channel and set the on/off switch to off (0).
Press the blowing channel on the leaf-blower until you hear a click and the security
-
button is fully visible in the notch.
To remove the blowing channel again solidly press the security button and
-
simultaneously pull the blowing channel from the leaf-blower.
Charging the battery
The battery must be charged before the leaf-blower can be used.
After you have first charged the battery, use the leaf-blower until the battery has
fully been de-charged. Repeat this 4 to 5 times.
Place the battery charger on a solid underground and place the plug in a 220/240
-
Volt 50 Hz socket.
The red light on the battery
-
charger now lights up.
Slide the battery delivered
-
with the leaf-blower in the
battery charger until you hear
a click.
(the
metal
battery charger in the grooves
on the battery)
One red light on the battery
-
starts lighting up to indicate
that
the
battery
charged.
(potential
other than the red light on the
battery indicate the charging level). The green light also starts lighting on the
plates
of
the
is
being
lights
41
Publicité
