Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MOUNTING
The cannister can be mounted out of the way on the wall using the wall
mount bracket.
1. Attach the bracket (M, fig 6) to a solid backing, such as a wall stud,
using the screws and washers.
2. Slide the two socket head screws (s, fig 6) that are mounted in the side
of the drum, into the two key slots (f, fig 6) in the bracket.
OPERATING INSTRUCTIONS
CAUTION: Always turn on the dust collector before starting your
dust-producing machinery and always stop the dust-producing
machinery before turning off the dust collector.
BEFORE STARTING
1. Assemble the dust extractor as described under "Assembly".
2. To minimize airborne dust make sure that all hoses, fittings and clamps
are secure and airtight.
3. For maximum system efficiency,make sure a cover is installed on any
unused hose inlet openings.
4. Never operate the machine without the filter bag and the collection bag
properly installed.
5. The sound level of this machine is rated at approximately 80-85 db
during operation. Make sure that adequate hearing protection is used
and that the overall sound level within the working environment is taken
into consideration.
CAUTION: Make sure the switch is in the "OFF" position before
plugging in the power cord.
6. Select the hose adaptor to suit the dust extraction adaptor on the power
tool to be used.
7. Ensure that the dust extraction adaptor on the power tool connects
securely to the flexible hose of the dust extractor. Use one of the hose
adaptors if required.
170227
9
Publicité
Table des Matières
