Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
● Children should be supervised to ensure that they do not play with the
appliance.
● If the supply cord is damaged, it must be replaced by an electrician or
power tool repairer in order to avoid a hazard.
● Only replace the supply cord with an approved type.
WARNING! Do not allow familiarity with your tool to make your
careless. Remember that a careless fraction of a second is sufficient to
inflict severe injury.
IMPORTANT: The warnings, cautions and instructions detailed in this
manual cannot cover all possible conditions and situations that occur. It
must be understood by the operator that common sense and caution are
factors that cannot be built into this product, but must be supplied by the
operator.
PACKAGE CONTENTS
1. Carefully remove the contents of the carton.
2. Release the locking strap (L, fig 2) on the drum and remove the motor
housing (A, fig 2).
WARNING! During
assembly, ensure the
tool is disconnected
from the power supply.
3.
Inside the dust
collection drum you
will find all the parts
required to assemble
the dust extractor. (fig
2)
4.
Remove the
contents and ensure
that all the parts are
there undamaged.
A
Motor housing
B
Drum
C
Filter cartridge
D
Filter bags (5)
E
Flexible hose
F
4 in. (100 mm) hose coupling
G
1-5/16 in. (34 mm) hose adaptor
H
1-9/16 in. (40 mm) hose adaptor
I
1-3/4" (45 mm) hose adaptor
J
2-11/16 in. (68 mm) hose adaptor
K
Hose clamps (2)
L
Locking strap
M
Wall mount bracket, screws & washers
170227
7
Publicité
Table des Matières
