Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE: Please let your local General International distributor know
immediately about any missing or damaged items.
ASSEMBLY PROCEDURE
WARNING! Serious personal injury could occur if you connect the
machine to the power source before you have completed the setup
process. Do not hook up the machine to a power source until instructed
to do so.
1. SLIDE THE FILTER BAG (D, fig 3) over the filter cartridge (C, fig 3)
2. FOLD IN AND TUCK any overhang of the filter bag into the inner cavity
of the filter cartridge.
3. PUSH THE CARTRIDGE FILTER with the filter bag onto the motor
housing.
4. PLACE THE ENTIRE MOTOR housing assembly on the dust collector
drum and secure it with the locking strap.
5. MOUNT THE FLEXIBLE HOSE to the collecting drum. Ensure that the
flexible hose is flush with the hose coupling of the dust collection drum
before tightening the hose clamp (fig 4).
6. FASTEN THE HOSE FITTING to the other end of the hose with a hose
clamp (fig 5).
8
Publicité
Table des Matières
