Miele Boost CX1 Mode D'emploi page 31


Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or
shampooed rugs or carpets are completely dry before
attempting to vacuum.

Do not vacuum any toner dust. Toner used in printers or
copiers, for example, can be electrically conductive.

Do not vacuum up any flammable or combustible liquids
or gases and do not vacuum in areas where such
substances are stored.

Do not vacuum at head height and do not let the suction
get anywhere near a person's head.
Cleaning

Do not immerse the vacuum cleaner or any accessories
supplied with it in water.

Clean the vacuum cleaner and accessories only with a
dry cloth or slightly damp cloth and mild dish detergent.
Exception for fine dust filter:
If the dust filter is heavily soiled, you can rinse the pleated
side of the filter and the filter mat under cold running water.
Do not use dish detergent or cleaning brushes. Do not use
any sharp or pointed objects. After cleaning, allow the fine
dust filter and the filter mat to dry in a well ventilated room
for a minimum of 24 hours, placing the filter with the
pleated side facing up. Choose a well ventilated room.
en-CA - Warning and Safety instructions
31