Prevention Measures For Users; Personal Safety Measures - Bona CombiEdge Short Manuel D'utilisation

Prevention Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when using
the sander. Always wear a dust mask when using the sanding
equipment.
The eyes and/or body may suffer injury if personal safety
clothing is not used. Always wear safety goggles, protective
clothing and a dust mask during sanding operations.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use ear protectors during
sanding operations.
Compliance with safety measures and warnings
Using the machine when not fully assembled may cause injury or
damage to people or objects. DO NOT use the machine when
it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
Using the machine without the safety guards and covers in
position may cause injury or damage. Always ensure that all
safety guards and covers are in position and secured well.
The sanding machine may create an explosive environment.
Cigarettes, cigars, pipes, lighters, pilot flames, or any other
source of fire may create an explosion if lit during sanding
operations. No sources of fire should be kept near the work area.
Poorly ventilated work areas may create an explosive
environment when some combustible materials are present in
the atmosphere, such as solvents, thinners, alcohol, fuel, some
paints, wood dust or other combustible materials. Floor sanding
may cause various materials and fumes to ignite. Read the
manufacturer's instructions for each chemical product used and
establish its combustibility. Always keep the work area well-
ventilated.
Striking nails when sanding may generate an explosion or fire.
Always ensure all nails are sunk before sanding surfaces.
Serious damage may occur if the power supply circuit trips
repeatedly or is undersized. Have the fuses, safety circuit and
power supply line checked by an authorized electrician.
Bona CombiEdge™ Short/Long Manual
®
Never become distracted during sanding operations, check
what is happening continually. Use common sense. DO NOT
use the machine when tired.
Performing maintenance and/or repairing the machine when
it is not fully disconnected from the power supply may cause
death due to electrocution. Disconnect the power supply before
carrying out any maintenance and/or repair work.
The use of this machine on a circuit which is not grounded may
cause death due to electrocution. Never disconnect or disable
the grounding conductor. Consult an electrician if the ground
conductor is missing or it is suspected that the circuit is not
suitably grounded.
The use of this machine with a damaged power supply cable
may cause electric shock. Check the power supply cable
regularly for damage such as splitting or wear and tear. DO NOT
use
the machine if the power supply cable is damaged. DO NOT use
the electric cable to move
the machine.
Injury or damage may occur if the machine runs over the power
supply cable and it becomes damaged. Keep the cable away
from the lower part of the machine to avoid contact with the
abrasive. Always keep the power supply cable raised above the
machine.
The moving parts on this machine may cause serious injury and/
or damage. Keep hands, feet and loose clothing away from all
moving parts of the machine
Performing maintenance or replacing the dust bag may cause
injury to the operator or people nearby if the machine is
connected to the power supply.
9 9