Sawdust Chamber (For The User); Disc (For The User); Wheels (For The User) - Bona CombiEdge Short Manuel D'utilisation

Routine Maintenance (Cont.)
Belt tension (for the user, cont.)
3.
Adjust the belt tension by
turning the knob (A) manually.
Using the machine when not fully assembled may cause injury
or damage to people or objects.
DO NOT use the machine when it is not fully assembled.
Keep all fittings tightly closed. Maintain machine settings in
accordance with the specifications.

Sawdust chamber (for the user)

Vacuum the sawdust
chamber (A) regularly to
prevent the hazardous
accumulation of dust.
14
4.
Check that belt tension has
1.2mm (0.05") deflection with
a center load of 1±0.1 N.

Disc (for the user)

Check the surface of the disc
(A) regularly and remove any
dirt.
Bona CombiEdge™ Short/Long Manual
®
5.
Tighten the screws (A) using
a 5mm Allen key.
Excessive belt tension may cause the premature failure of the
ball bearings.

Wheels (for the user)

Remove dirt from the machine
unit and wheels regularly. Dirt
may cause uneven sanding.
6.
Replace the belt safety plate
and tighten the screws (A).