Mains Connection; Inserting Batteries Into The Wireless Microphone - Conrad renkforce 1398138 Notice D'emploi

• Turn off the audio device (e.g. mixer) which you are going to connect to the receiver station and
disconnect it from the power supply.
• Connect the audio input on the audio device to one of the audio outputs on the receiver station. If the
signals on the two transmitters are to be transmitted separately, connect the CH. A (12) and CH. B (13)
connections to two inputs on the audio device (e.g. mixer).
• If the signals of each receiver are to be transmitted together, connect the 6.3 mm audio cable (21) to the
MIX OUTPUT (11) jack output and an input on the audio device.
b) Mains connection
You must be able to unplug the power adapter quickly and easily from the mains in the event
of a fault.
Do not let the mains cable come into contact with other cables.
Be careful when handling mains cables and mains connections. Mains voltages can cause fatal
electric shocks.
Ensure that the receiver station is switched off (the POWER toggle switch (6) must not be
switched on) before connecting it to the power supply.
• Connect the power adapter (20) to the 12V/DC 500mA power input (10) on the receiver station.
• Connect the power adapter to a suitable wall-mounted mains socket.
• The receiver station can be switched on and off using the POWER toggle switch (6). Position I: Device is
switched on, position 0: Device is switched off

11. Inserting batteries into the wireless microphone

Insert the batteries (2 x AA batteries are included for each microphone) when using the product for the first
time. When the batteries are nearly empty, the battery status indicator (17) on the wireless microphone will
show a low battery level. Change/insert the batteries as described below.
• Turn off the wireless microphone. Press and hold the power button
off.
(18) until the LCD display (16) turns
27