Setup; Connection; Connecting The Receiver Station - Conrad renkforce 1398138 Notice D'emploi

LCD display and symbols (transmitter)

9. Setup

Do not place the receiver station on soft surfaces such as carpets or beds.
Do not place the product directly next to devices with strong electrical or magnetic fields (e.g.
transformers, motors, cordless telephones, wireless devices and radios), as these can impair
the functioning of the product.
The product can also be affected by interference from tuners, televisions and other equipment.
Keep the product as far away as possible from these types of devices. Metal surfaces, reinforced
concrete walls and other obstructions can reduce the transmission range.
Never place the device on valuable or sensitive furniture without proper protection.
Place the device on a stable, clean, dry, level and horizontal surface.

10. Connection

a) Connecting the receiver station
Only use suitable shielded XLR and jack cables for connecting equipment to the outputs. Other
cables may cause interference.
Only devices with an XLR connection may be connected to the XLR output, and only devices
with a jack connection may be connected to the jack output in order to avoid distortions or
mismatches that could damage the product.
• Turn the receiver station off. The POWER toggle switch (6) must not be turned on (switch to 0). The LCD
display (3) should not be on.
26
Frequency display in MHz
Battery status indicator: shows the battery level of the microphone.
Displays channel and channel number
Pairing symbol: Flashes when searching for a receiver station.
Press the power button
searching for a receiver station.
(18) twice in quick succession to start