Hayward TREVINIUM HP55TR Manuel D'instructions Et D'installation page 14

4. USER INTERFACE (continued)
Timer 2 settings
After the Timer 1 settings, you will access directly the settings for Timer 2:
and .
Proceed in the same manner as for Timer 1.
Nota: To access directly Timer ON2
twice on .
Timers suppression
1) Press for 2s, Timer ON1
2) Press to make the time display flash.
3) Press to suppress the Timer
4) Press to validate.
5) Press for 2s, the Timer
Press once , the Timer
6) Press to make the time display flash.
7) Press to suppress the Timer
(*) To access Timers 2
twice . Proceed in the same manner as above.
4.4 Operation mode selection: cooling, heating or automatic
In Mode "OFF" or "ON"
Press the button to change mode: cooling, heating or automatic.
If the heat pump is set in heating only or cooling only, changing mode
is not possible.
1
(Start and Stop)
flashes.(*)
flashes.
flashes.(*)
or , follow steps 1) or 4) then press
, press for 2s, then press
.
.