Installation Instructions - Invicta ARATOS Mode D'emploi

INSTALLATION INSTRUCTIONS

To ensure that surrounding surfaces do not exceed 65 °C above room temperature, surrounding objects must be
positioned at distances in accordance with the table below.
This distance is required to access the rear of the stove, to the power supply connector, the on off pellet-mode switch,
and for maintenance and cleaning of the pellet feed system.
800 mm required
behind the gear
motor access panel
XD, on 17/02/2020
ARATOS Plug-in
FLOOR PLAN OF STOVE INSTALLATION
stove
dual
Concrete slab
Page 7 sur
model P649000
Rear
wall
41